Jetprime Throttle for BMW - Technical AdviceJetprime_throttle_cover_integrated_controls-bmw_S1000_xr

 

 

 

 

 

 

 

 

 

 

 

 

Jetprime have released the ACC08 Throttle / Cover with integrated right hand switch controls to suit many BMW models including:

F 750 GS (850 CCM) - 2018
F 850 GS - 2018
R 1200 GS (EURO 4) - 2016/2018
R 1200 GS (LC) - 2013/2016
R 1200 GS ADVENTURE (EURO 4) - 2016/2018
R 1200 GS ADVENTURE (LC) - 2014/2016
R 1200 GS EXCLUSIVE (EURO 4) - 2017/2018
R 1200 GS RALLYE (EURO 4) - 2017/2018
R 1200 RS - 2015/2018
R 1250 GS - 2018
R 1250 GS ADVENTURE - 2018
R 1250 RS - 2018
S 1000 RR (EURO 4) - 2017/2018
S 1000 RR - 2015/2016
S 1000 RR - 2019/2020
S 1000 XR (EURO 4) - 2017
S 1000 XR - 2015/2016

The kit provides the following benefits:

- Plug & Play - OE plugs ensure no modifications to wiring is required
- Allows more space and flexibility on handlebar for brake lever position etc
- Does not require handlebar to be drilled
- Protects internal electronics as it is more resistant than the original unit.
- High Strength - Crash Resistant - Lighter Weight - 100% CNC machined from high grade 7075 alloy solid billet
- Eliminates troublesome flex of the original plastic configuration
- IP69 military spec switches that insure water proof resistance and 1 million cycles of fatigue resistance
- Black anodised finish with laser engraving - Available with or without logo

The kit is does not include the twist grip tube, grip or throttle sensor. It is designed to utilise your current BMW OE throttle with a minor modification it is relatively easy to fit and as it uses your current sensor should not in theory require recalibrating.

If you do fit another throttle it is critical to have the throttle sensor checked and recalibrated by an official BMW service centre/main dealer.

We recommend the fitting to be carried out by an experienced and professional BMW approved mechanic.

Also please CHECK the shape of your throttle before ordering/fitting for compatibility with the Jetprime throttle cover:

 

Here are some simple steps outlining the procedure:

 

1) Remove the OE BMW right hand switch

Jetprime-Throttle-Fitting-BMW-S1000RR

Jetprime-Throttle-Fitting-BMW-S1000RR 1

 

 

 

 

 

 

 

 

 

2) Remove the OE BMW Throttle

Jetprime-Throttle-Fitting-BMW-S1000RR 2

 

 

 

 

 

 

 

 

 

 

3) Very carefully remove the mounting bracket from the OE throttle housing - take care not to damage the housing including the wires and plugs for the throttle and heated grips

Jetprime-Throttle-Fitting-BMW-S1000RR 3Jetprime-Throttle-Fitting-BMW-S1000RR 3a

 

 

 

 

 

 

 

 

 

 

 

4) Slide the outer housing onto the OE throttle - the fit is snug therefore be gentle and squeeze evenly on both sides

Jetprime-Throttle-Fitting-BMW-S1000RR 4

Jetprime-Throttle-Fitting-BMW-S1000RR 4a

Jetprime-Throttle-Fitting-BMW-S1000RR 4c

Jetprime-Throttle-Fitting-BMW-S1000RR 4b

Jetprime-Throttle-Fitting-BMW-S1000RR 4d

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5) Loosely assemble the lower and upper clamps:

Jetprime-Throttle-Fitting-BMW-S1000RR 5 Jetprime-Throttle-Fitting-BMW-S1000RR 5aJetprime-Throttle-Fitting-BMW-S1000RR 5bJetprime-Throttle-Fitting-BMW-S1000RR 5c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6) Fix the assembled clamps/plate to the housing with the x2 small retaining screws - tighten the screws in equal stages - do not tighten one fully before the other

Jetprime-Throttle-Fitting-BMW-S1000RR 6Jetprime-Throttle-Fitting-BMW-S1000RR 6b Jetprime-Throttle-Fitting-BMW-S1000RR 6aJetprime-Throttle-Fitting-BMW-S1000RR 6c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7) Mount the assembly onto the handle bar - ensure all the bolts and screws are secure and tight:

Jetprime-Throttle-Fitting-BMW-S1000RR 7 Jetprime-Throttle-Fitting-BMW-S1000RR 7a

 

 

 

 

 

 

 

 

 

8) Connect the - Throttle Connector to the wiring loom | Right hand Switch Connector to the wiring loom | Heated Grips Connector to the wiring loom (if applicable):

Jetprime-Throttle-Fitting-BMW-S1000RR 8

Jetprime-Throttle-Fitting-BMW-S1000RR 8a

Jetprime-Throttle-Fitting-BMW-S1000RR 8b

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9) CHECK THE THROTTLE OPERATES CORRECTLY - BOTH opens and RETURNS fully and smoothly without resistance!

Jetprime-Throttle-Fitting-BMW-S1000RR 9

 

 

 

 

 

 

 

 

 

 

10) Check all the buttons and functions work correctly before starting the motorcycle

Jetprime-Throttle-Fitting-BMW-S1000RR 10

Jetprime-Throttle-Fitting-BMW-S1000RR 10aJetprime-Throttle-Fitting-BMW-S1000RR 10b

 

 

 

 

 

 

 

 

 

 

 

 

 

A video of the procedure can be found online HERE

IMPORTANT NOTES:

We recommend the throttle cover is fitted by a qualified mechanic.

Always ensure throttle movement if free and full. If you are fitting a different BMW throttle sensor the sensor will require recalibrating by a qualified BMW mechanic prior to riding.

ANY questions / issues or concerns please consult with a qualified BMW mechanic or feel free to contact us.

MotorcycleRaceParts are the exclusive UK importer of Jetprime Switches and Throttles - the BMW Jetprime switches and Jetprime throttles can be found online here:

BMW Jetprime switches and Jetprime throttles